A rotational axis that is mounted to the uppermost piece of the microscope stage. It allows 360° unlimited axial rotation of small samples and TEM grids. The system includes TEM grid holders, an adaptor plate and an operator's handbook. *Note: the system requires the fourth channel on an existing NanoControl unit or dedicated control electronics and vacuum feedthrough (e.g. when used in conjunction with MGS2-EM).
Three-axis micromanipulator system for life science. The system includes control electronics, a joypad, PC software, pipette holders, a connector system for the air pressure tube and headstage, a magnetic mounting foot, a light microscope mounting plate and an operator's handbook.
An electrical characterisation system for electron microscopy. The system contains the latest generation of probers (MM4-EM) mounted on a load-lock compatible platform with an integrated super-flat three axis substage. A low-current measurement kit is integrated into each manipulator. The system includes control electronics in a 19" electronics rack, a joypad, a vacuum flange, a vacuum feedthrough, sample probe needles, iProbe control software and an operator's handbook.
Hardware and software module for the Advanced Probing Toolkit for live monitoring of up to eight tip signals in order to determine the contact status for each probe. Additionally, the system also includes the Transistor Test, Tip2Tip Test, and Signal Routing components.