Welcome to our new site, if you can’t find what you’re looking for please get in touch via our contact us page.
XYZ (3mm) substage for electron microscopy
XYZ (3mm) substage with 30nm travel for electron microscopy. The system includes control electronics, a joypad-, PC software, a vacuum flange, a vacuum feedthrough and an operator’s handbook.
£0.00
Related products
-
Coating LAB software
Coating LAB Windows-based software can be installed on a laptop for monitoring and documenting coating processes. Fully automatic logs and charts containing all process-related data can be exported as screenshots or CSV files for Office applications. Available information includes process vacuum, current and voltage along with film thickness and coating rates (Internet connection required). Coating-LAB will allow remote service access for error diagnosis and process optimisation.
Price On Request £0.00 Add to basket
Coating LAB software
Coating LAB Windows-based software can be installed on a laptop for monitoring and documenting coating processes. Fully automatic logs and charts containing all process-related data can be exported as screenshots or CSV files for Office applications. Available information includes process vacuum, current and voltage along with film thickness and coating rates (Internet connection required). Coating-LAB will allow remote service access for error diagnosis and process optimisation.
£0.00Price On RequestAdd to basketAdd to QuoteWithin your QuoteAdd to Quote -
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
Price On Request £0.00 Add to basket
PS-006 planetary gear table
Consisting of base plate for connection to the tilt and height adjustable specimen table of the CCU-010 base unit. Specimen holders for six large (Ø 25.4mm) or six small (Ø12.7mm) SEM pin stubs. DC micro-motor for rotation and planetary movement, quartz sensor (centre), speed control: 0-100%, rotation: 0-20rpm approximately, planets: 0-65rpm approximately
£0.00Price On RequestAdd to basketAdd to QuoteWithin your QuoteAdd to Quote -
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
Price On Request £0.00 Add to basket
RC-010 software for remote control of CCU-010
Windows-based RC-010 remote control software allows Safematic CCU-010 coaters to be run remotely for the control, monitoring and analysis of coating processes, for example in a glove box. The RC-010 comes ready with pre-defined recipes with optimal settings for the most common metal sputtering targets as well as for carbon. Requires connection from a laptop or computer (not supplied) to the CCU-010 coating system via a USB cable.
£0.00Price On RequestAdd to basketAdd to QuoteWithin your QuoteAdd to Quote -
CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
Price On Request £0.00 Add to basket
CCU-010 HV (high vacuum)
The Safematic CCU-010 HV vacuum coater is suitable for both SEM and TEM sputter coating and carbon coating applications.
£0.00Price On RequestAdd to basketAdd to QuoteWithin your QuoteAdd to Quote