Welcome to Labtech-EM, if you can’t find what you’re looking for please get in touch via our contact us page.

EM-Tec compact and universal vice sample holders

Vice-type specimen holders are quick and easy to use. They hold the specimen by clamping it between moving jaws, which enables quick specimen loading and reduces down time. They are especially useful when similar specimens or series of the same specimen need to be examined. Using a vice specimen holder is easier, quicker and cleaner than using conductive adhesives or glue. A vice clamps the specimen and provides the rigidity needed for high resolution imaging. Available EM-Tec SEM specimen are:

  • EM-Tec V22 compact vice specimen holder for specimen sizes up to 0-22mm. One fixed jaw and a spindle-driven moving jaw. A cost-effective, compact vice which can be used in both standard SEMs and table top SEMs. Made from vacuum grade aluminium with a brass spindle and stainless steel screws.
  • EM-Tec V22L low profile version of the EM-Tec V22 compact vice holder. The jaws are 3mm high instead of 10mm, the rest is the same.
  • EM-Tec MV22 combined compact vice holder (0-22mm) plus multi-pin stub holder for up to five standard 12.7mm SEM pin stubs. This cost-effective multi-specimen holder has been designed for table top SEMs and SEMs with smaller specimen stages. It has one fixed jaw and a spindle drive to move the other jaw. Made from vacuum grade aluminium, brass spindle and stainless steel screws.
  • EM-Tec 3V22 triple compact vice holder includes three separately adjustable EM-Tec V22 compact vices on a single base plate. This enables holding and investigating of three different specimens to save on SEM venting and pumping time. Made from vacuum grade aluminium, brass spindles and stainless steel screws.
  • Additional optionally available vice jaws are:
    • vice jaw with a single 120° large groove for round specimens
    • standard vice jaws with triple grooved/smooth side – vice jaws can be stacked to increase the jaw height from 12 to 24mm.

Made from vacuum grade aluminium, brass sliders and stainless steel rods and springs.

EM-Tec vice specimen holders are available with pin and with an M4 threaded hole. For use on JEOL SEMs, we suggest the use of an EM-Tec SEM stub adaptor.

Download our Technical Support Bulletins:

Technical Support Bulletin: TSB 12-000200 EM-Tec V22 compact vice type sample holder
Technical Support Bulletin:TSB 12-000200 EM-Tec V22 compact vice type sample holder
Technical Support Bulletin: TSB 12-002400 EM-Tec 3V22 triple compact vice sample holder

#12-000200 (with pin) or #12-000300 (M4 thread).

#12-002400 (with pin) #12-003400 (with M4)

#12-000201 (with pin) #12-000301 (with M4)

Specifications of  EM-Tec compact and universal vice clamp holders:

Product # Type Dimensions Max. specimen size Clamping method Stage compatible
12-000200 EM-Tec V22 39x25x22mm 22mm Spindle driven 3.2mm SEM pin stub
12-000300 EM-Tec V22 39x25x22mm 22mm Spindle driven M4 thread
12-003319 EM-Tec V14 25x25x12.5mm 13-15mm Spindle driven M4 thread
12-003219 EM-Tec V14 25x25x12.5mm 13-15mm Spindle driven M4 thread
12-000201 EM-Tec MV22 39x25x22mm 22mm Spindle driven 3.2mm SEM pin stub
12-000301 EM-Tec MV22 39x25x22mm 22mm Spindle driven M4 thread
12-002400 EM-Tec 3V22 39x76x27mm 22mm (3x) Spindle driven (3x) 3.2mm SEM pin stub
12-003400 EM-Tec 3V22 39x76x27mm 22mm (3x) Spindle driven (3x) M4 thread
12-002217 EM-Tec 3V22 48x25x27mm 18/24mm Spindle-driven 3.2mm pin stub
12-003317 EM-Tec 3V22 8x25x27mm 18/24mm Spindle-driven M4 thread

 

Ordering information: