Welcome to Labtech-EM, if you can’t find what you’re looking for please get in touch via our contact us page.

EM-Tec EBSD and t-EBSD pre-tilt specimen holders and specimen holder kits

EM-Tec EBSD pre-tilt sample holders all include a 70° pre-tilt angle to facilitate EBSD analysis. With a 70° pre-tilt angle there is no need to tilt the SEM sample stage.

Using 70° pre-tilted holders instead of tilting the SEM stage offer distinct advantages:

  • Correct EBSD angle when loading sample
  • No stage drift in Z-direction
  • Choice of 70° or 20° pre-tilt angles

EM-Tec EBSD sample holder kits combine a number of available EM-Tec SEM sample holders: metallographic mount holders, geological slide holder, small vice type holders and S-Clip holders. These can be combine with the EBSD 70° pre-tilt holder and a height extender if needed.  The EM-Tec P70 and H70 pre-tilt EBSD holders include both 70° pre-tilt and -20° pre-tilt to enable EBSD measurements at a 90° angle at the same sample. EM-Tec EBSD 70° pre-tilt holders are available with pin and M4 threaded hole.

The available EM-Tec EBSD sample holders and sample holder kits  with 70° pre-tilt angle are:

  • EM-Tec P70 / H70 EBSD holder for pin stubs and SEMpin stub-type sample holders, pin / M4
  • EM-Tec P70M / H70M EBSD holder for Hitachi M4 SEM stubs and M4 threaded holders, with pin / M4
  • EM-Tec P71 / H71 EBSD sample holder kit for 25mm (1”) metallographic mounts, with pin / M4
  • EM-Tec P72 / H72 EBSD sample holder kit for 30mm (1-1/4”) metallographic mounts, with pin / M4
  • EM-Tec P73 / H73 EBSD sample holder kit for up to 48x28mm geological slides, with pin /M4
  • EM-Tec P74 / H74 EBSD sample holder kit for FIB lamellas, with pin / M4
  • EM-Tec P75 / H75 EBSD S-clip sample holder kit for Si chips & thin samples, with pin / M4
  • EM-Tec P76 / H76 EBSD mini vice clamp holder for cross-section samples up to 4mm, with pin / M4
  • EM-Tec P77 / H77 EBSD mini split mount vice holder for cross-section samples up to 8mm, with pin / M4
  • EM-Tec P78 / H78 EBSD vice clamp holder for samples up to 16mm, with pin / M4
  • EM-Tec TE3 t-EBSD holder for three TEM / FIB Lift-out grids with pin / M4

EM-Tec EBSD sample holder kits combine a number of available EM-Tec holders: metallographic mount holders or geological slide holders with the EBSD 70° pre-tilt holder and a height extender for the 30mm/1-1/4” EBSD sample holder to provide clearance. The height extender can be easily removed if the stage adaptor on the SEM stage does not require the use of height extender. The EM-Tec EBSD 70° pre-tilt holders are available with pin and M4 threaded hole.

Please note: Using a stub adaptor with JEOL SEMs is only advised if there is enough height clearance or if the JEOL SEM has been converted to use SEM pin stubs.

Capacity, size and compatibility of  EM-Tec pre-tilt and variable tilt holders:

Product # Style Tilt angle Size w/o pin Stub /sample compatibility Stage compatibility
10-002270 EM-Tec P70 70° EBSD 12.5×12.5x20mm 3.2mm pin stub 3.2mm pin stub
10-002274 EM-Tec P70M 70° EBSD 12.5×12.5x20mm Hitachi M4 thread 3.2mm pin stub
12-000268 EM-Tec P71 70° EBSD Ø34x38x29mm Ø25mm / 1” mount 3.2mm pin stub
12-000269 EM-Tec P72 70° EBSD Ø40x48x30mm Ø32mm / 1-1/4” mount 3.2mm pin stub
12-000272 EM-Tec P73 70° EBSD 52x32x25mm 48x28mm slides 3.2mm pin stub
12-000273 EM-Tec P74 70° EBSD 12.5x21x22mm FIB lift-out grids 3.2mm pin stub
12-000274 EM-Tec P75 70° EBSD 12.5x28x22mm Silicon chips / thin samples 3.2mm pin stub
12-003274 EM-Tec P76 70° EBSD 12.5x20x21mm Cross sections 0-4mm 3.2mm pin stub
12-003278 EM-Tec P77 70° EBSD 15x23x24mm Cross section 0-8mm 3.2mm pin stub
12-003279 EM-Tec P78 70° EBSD 25x23x30mm 0-16mm 3.2mm pin stub
12-002271 EM-Tec TE1 70°/ 20° t-EBSD 12.5×12.5x30mm Ø3.05mm TEM grid 3.2mm pin stub
12-002273 EM-Tec TE3 70°/ 20° t-EBSD 12.5×12.5x30mm Ø3.05mm TEM grids 3.2mm pin stub
12-000370 EM-Tec H70P 70° EBSD 12.5×12.5x20mm 3.2mm pin stub M4 thread
12-000371 EM-Tec H70 70° EBSD 12.5×12.5x20mm Hitachi M4 thread M4 thread
12-000368 EM-Tec H71 70° EBSD Ø34x38x29mm Ø25mm / 1” mount M4 thread
12-000369 EM-Tec H72 70° EBSD Ø40x48x29mm Ø32mm / 1-1/4” mount M4 thread
12-000372 EM-Tec H73 70° EBSD 52x32x25mm 48x28mm slides M4 thread
12-000373 EM-Tec H74 70° EBSD 12.5x21x22mm FIB lift-out grids M4 thread
12-000374 EM-Tec H75 70° EBSD 12.5x28x22mm Si-chips / thin samples M4 thread
12-003374 EM-Tec H76 70° EBSD 12.5x20x21mm Cross sections 0-4mm M4 thread
12-003378 EM-Tec H77 70° EBSD 15x23x24mm Cross section 0-8mm M4 thread
12-003379 EM-Tec H78 70° EBSD 25x23x30mm 0-16mm M4 thread
12-003271 EM-Tec TE1 70°/ 20° t-EBSD 12.5×12.5x30mm Ø3.05mm TEM grid M4 thread
12-003273 EM-Tec TE3 70°/ 20° t-EBSD 12.5×12.5x30mm Ø3.05mm TEM grids M4 thread

 

EBSD holders with pin stub fitting

EBSD holders with Hitachi M4 fitting